The son of an interior designer, Rob was already painting walls and hanging wallpaper at 14. After assisting the family interior design business and building two homes of his own, Rob has been working as a freelance writer since 2010, specializing in flooring, remodeling, and HVAC systems. Rob is also a pastor, serves on the Church Board and continues to give sermons. He is married to Diane, and they have 3 kids and 2 grandkids.
Editorial note: Homefront (defined in the Disclosure below) may earn a commission from affiliate partner links featured on our site. This commission does not influence our editors’ opinions or evaluations.
The average labor costs to install hardwood is between $3 and $4 per sq/ft, but depending on factors like your location, the condition of your subfloor, the complexity of the project and the reputation of the installer this average baseline rate increases to $4.50-$7.00 per sq/ft. In this post we will compare the factors that affect installation prices and estimate the installation cost of your wood floor project.
In this guide we will drill down and focus exclusively on hardwood floor installation cost and how you can calculate a reliable estimate for your own project before you start getting quotes from local contractors.
The average total cost ranges from $9 to $20 per square foot.
The average total cost for carpet ranges from $5.67 to over $21 per square foot, depending on the quality.
The average total cost for laminate flooring is between $3 to $13 per square foot.
The standard hardwood floor installation cost is between $3 and $4 per square foot, but let’s be clear this is just the baseline cost.
Calculating your own hardwood installation prices is not straightforward, proper consideration of many factors is necessary to get an accurate estimate of the total cost to install hardwood flooring.
Here we explain each factor, with pricing, and summarize installation costs in a convenient table below.
Hardwood flooring installers expect homeowners to get a wood floor installation estimate from several companies, so they aim for a price point which will be as competitive as possible while allowing them to cover their expenses and make a fair profit.
In the US, most flooring contractors make a total net profit—the profit after all expenses including taxes – of 3 to 7 percent. Those that make less typically can’t stay in business. A few contractors make more, usually because their reputation for quality work is so outstanding that homeowners are willing to pay more for their services.
With that in mind here are all the hardwood flooring costs that a contractor will factor into their quote, including materials and installation. We end this guide with suggestions for saving money on your flooring project.
Installing a proper subfloor is an investment in the durability and performance of the hardwood flooring you’ve chosen. It will help to prevent squeaks, board separation and uneven floors that can be unsightly and a trip hazard.
This is a relatively inexpensive step that shouldn’t be ignored. Cutting costs here will likely make the finished job far less satisfactory. Indeed, some installers won’t install flooring, or at least won’t warranty their work, when the homeowner opposes subflooring installation.
Plywood average cost is $20-$22 per 4’x8’ sheet depending on the thickness chosen, or roughly $0.65 per square foot.
There is a slight additional cost for fasteners and glue. Installation costs average $25-$30 per hour. Since subfloor installation can be done quite quickly, this equates to +/- $0.55 per square foot:
Most flooring installers start with a base price in mind, typically $3.00-$4.00 per square foot.
The base price from one installer to the next will vary based on:
When the flooring installation company’s representative comes to your home or office, he or she will survey the work with an eye trained to look for factors that will increase their cost.
The price might then be adjusted upwards based on the size of the job and any non-standard complexities expected to add time and/or expense to the work. Here is an overview of the factors considered:
Some installers make a basic distinction in installation cost between the two. When this is the case, solid hardwood flooring costs more to install. How much more depends on how hard the wood is.
A few examples from the Janka Hardness Scale will help make the point. Here are woods used in flooring with their Janka Scale rating. The higher the number, the harder the wood: Southern yellow pine (850), red maple (950), red oak (1290), hard maple (1450), acacia (2250), Brazilian redwood (3190) and ipe/Brazilian walnut (3680).
When very hard flooring is installed, more equipment and more labor is involved. This can raise the cost of installation by $0.50-$1.50 per square foot.
Each job includes certain fixed costs, namely the cost of fuel required to get to the job-site and wages that are being paid while the crew is traveling, setting up and taking down equipment and returning.
The larger the job, the more these fixed costs are spread out. In other words, the more flooring to be installed, the lower the price per square foot will be, all else being equal.
Larger rooms require less time spent trimming and fewer transitions per the amount of flooring installed. Therefore, installing 500 square feet, for example, in one large room will cost less than installing the flooring in a hallway and several small rooms.
Doorways, pillars, fireplace hearths, cabinetry, fixtures, built-in bookshelves and other obstacles require time-consuming trimming and piecing, so they raise the estimates per square foot.
Two flooring types joining each other require the installation of a transition piece. Transition installations might be included in the total per-foot estimate or priced separately at $2-$4 lineal foot.
It typically takes between 10-15 days to install hardwood flooring depending on these factors and more.
If the jobsite is nearby, a good quantity of flooring is to be installed, the wood isn’t exceptionally hard and the layout of the room or rooms requires little extra labor, the base price of $3-$4 per square foot might hold.
The price increases as the number of factors increases, so the top end of the scale can be as high as $10 per square foot.
While the spectrum ranges from $3 to $10, most hardwood flooring installation estimates fall in the range of $4.50-$7.00 per square foot.
The cost of installing hardwood on stairs is typically estimated separately. Stairs take time, and time is money. Standard 36” steps are priced at $40-$75 per stair.
If there are railing spindles and banister posts to trim around or if hardwood is being installed on both treads and risers, the cost will increase. A three-step set of stairs often costs $200 or more while a 13-step stairway costs $650-$900.
So far, our discussion has been about floors that have the proper subfloor and are ready to be covered with hardwood. That is the ideal situation, but most jobs require additional preparation. Let’s look at those costs.
Removing flooring can be hard work, but it isn’t complicated. The goal is to remove the old material along with all adhesive and/or fasteners without damaging the subfloor.
DIY flooring removal can save you $200-$350 per 1,000 square yards of flooring, but if the flooring contractor must repair damage that could have been avoided, it will reduce or eliminate your cost savings.
If the rooms where the flooring is to be installed are not cleared, costs might be added to the estimate. How much furniture must be moved will determine the estimated charges.
This table summarizes all the hardwood flooring installation costs discussed here and the factors affecting the price.
If you’re planning a home and want to reduce all future flooring installation costs, create a floor plan with open spaces and larger rooms. While some might prefer an open floor plan anyway, it’s probably not worth making design changes if you’ve got other ideas for your home.
In existing homes, the easiest ways to reduce your outlay is to remove any old flooring yourself. If you do, take care to wear protection for hands, knees and eyes. If the work is dusty, don a dust mask too.
Homeowners save the most money by getting written estimates from several flooring contractors that know they are competing for the work. When you do this, keep in mind the importance of proper installation.
Work badly done will reduce the looks and performance of the flooring and might ultimately cost you more money than you save. Therefore, as you evaluate estimates, consider the experience of the contractor and the crew that will do the work, not just its cost.
It is worth paying a bit more to get a crew with proven workmanship and the higher compensation that goes along with quality installation.
Editorial note: The name “Homefront” refers to the alliance between USA TODAY and Home Solutions that publishes review, comparison, and informational articles designed to help USA TODAY readers make smarter purchasing and investment decisions about their home. Under the alliance, Homefront provides and publishes research and articles about home service and home improvement topics.
Homefront has an affiliate disclosure policy. The opinions, analyses, reviews or recommendations expressed in this article are those of the Homefront editorial staff alone (see About Homefront). Homefront adheres to strict editorial integrity standards. The information is believed to be accurate as of the publish date, but always check the provider’s website for the most current information.
Floor tile patterns It’s no secret that we love floor tiles and the variety of looks, colors, textures and styles that are available mean that tiles will often be a great solution for home flooring projects, especially in the bathroom or kitchen areas. The great thing about tiled flooring is that, because of their inherent…
What are the cheapest flooring options? The cheapest flooring options are vinyl sheet flooring, luxury vinyl flooring, laminate flooring, oak flooring seconds, plywood flooring, painted flooring, wallpaper, and carpet tiles. All these cheap flooring options can be purchased for under $2.00 per square foot. We love a challenge, so when we were asked to find…
If you’re looking for great garage flooring ideas and inspiration, let us help. The perfect garage floor product is out there waiting for you, but it’s not always clear which direction to take. That’s why I’ve researched the most popular garage flooring options and split them into categories so you can understand which option best…
The most expensive flooring is natural stone because of the cost of excavation, transportation, and installation. Other expensive flooring options include exotic, hand-scraped, and reclaimed hardwoods and high-end wool and designer carpets. The highest quality flooring can easily exceed $20 per square foot to buy and install. We like to give you information on all…